OLIVETTY PASSBOOK PRINTER CALIBRATION

 If your olivetty passbook printeris not working, test the following method of calibration.

How to calibrate Olivetti PR2/PR2E Passbook Printer

Olivetti passbook printers are widely used printer in post offices. Sometimes we find problem with printer when it stops printing. In that case, calibrating the printer can solve your problem. Follow the steps to calibrate Olivetti PR2/PR2E passbook printer:

• Switch off the printer.
• Open the top cover of the printer and keep Head of printer at extreme left side.
• Press all three buttons ("Station 1", "Local" and "Station 2") and then switch on the printer. Printer will give a beep sound.
• Now close the top cover of the printer and press "Station 1" two times. The print Head will start moving and roller will start rolling.
• Now press "Station 2" once and then add a paper to the printer and again press "Station 2".
• Printer should take paper inside and all LEDs should blink within 5-10 seconds.
• If not, then keep pressing "Station 2" until all LEDs glow.
• Now switch off the printer and take test print. To take test print, press "Station 2" and power on the printer. If printer gives you the proper test page then congratulations, your printer has been troubleshooted.
• Note: Calibrating a printer is not an easy task and you may do these steps three-four times to calibrate the printer properly

HP UNIVERSAL PRINTER DRIVER

    The HP Universal Print Driver is the single driver that gives users instant access to a range of HP print devices--in the office or on the road--without downloading separate drivers.

VISIT




http://h20338.www2.hp.com/hpsub/cache/343033-0-0-225-121.html?jumpid=ex_r2845_go/upd

NEW DRIVER FOR HP LASER JET P 1007

Laser Printer Model HP LJ 1007 have been supplied to Post offices and Sub divisional offices under various Plan schemes. It has been brought to the notice of Technology Division that difficulty is being experienced to cancel the print jobs on HP LJ 1007 Laser Printer. The matter has been taken up with M/s HP. M/s HP has supplied a new printer driver software for HP LJ 1007 Laser Printer. It is informed that the new software will resolve the above mentioned problem. Down load the file from the link and Rename it as .zip and extract the new driver.

PASSBOOK PRINTER-INITIAL CONFIGURATION AND SETTINGS

TO CHANGE THE EMULATION TO IBM FROM OLIVETTY


1. Press station 1 +station2 ; ON the printer  and continue pressing for 30sec& insert the paper.

2. it shows station1=continue,station2=skip,local=config

3. Press local, it shows Menu : config

4.. Press station1 to continue until the printer name display as OLEVETTI

5. Press station2, the display changes to IBM

6. continue press station1 button until it displays save changes to Y

7. switch off the printer and swith on

TO Add New PASSBOOK PRINTER(It is for COM1 / Serial Port)

FOR WINDOWS XP